Makita AN923 3-1/2-inch Framing Nailer (22 Degree Round Head)
I have now been take Makita AN923 3-1/2-inch Framing Nailer (22 Degree Round Head) for days gone by almost 1 year. Makita AN923 3-1/2-inch Framing Nailer (22 Degree Round Head) wuth brand "Makita" may be the best Framing Nailers on the market.
Makita AN923 3-1/2-inch Framing Nailer (22 Degree Round Head) Features
- Large Capacity Air Chamber for increased power to drive nails varying in length from 2" - 3-1/2".
- Dry-Fire prevention, tool stops firing when 3 nails remain n the magazine
- Sharp Pronounced Spurs, Grip Wood for controlled firing at an angle
- "Tool-less Depth Adjustment, 9 settings allows user to drive nails to the precise level on the wood's surface
- Sky Hook, Tool can remain close by, but never in the way.
These Makita AN923 3-1/2-inch Framing Nailer (22 Degree Round Head) way out perform any other brand including major brands and department store brands. The major selling points for me are hight quality with low price.
The Makita 3 1/2in. Framing Nailer has a large-capacity air chamber for increased power to drive plastic or wire-coated nails varying in length from 2in. to 3 1/2in., yet is compact enough to fit between standard 16in. framing studs. Integrated 3-mode selector switch (bounce, sequential, lock) allows user control over firing options, while the tool-less depth adjustment with 9 settings allows user to drive nails to the precise level on the wood's surface. Fastener Sizes (in.): 2-3 1/2, Fastener Size (gauge): 113-.162, Operating PSI: 65-120, Coil or Strip: Coil, Inlet Size (in.): 1/4 or 3/8, Fasteners Used: Round head nails, Adjustable Depth Control: Yes (tool-less), Tool Weight (lbs.): 8.7, Fastener Capacity Per Strip: 64-74, Min. Hose Size (in.): 1/4, Case Included: No, Tool Length (in.): 22
category: Framing Nailers
Brand: Makita
Rating : 4.7
Review : Worth the features
I purchased the nail gun because of two features that many other guns did not have. I wanted the dry fire lock-out and the rafter hook. My biggest disappointment was that I had to return the first gun I received because it leaked air from the exhaust port when in use and not in use. The leak resulted in erratic sinking of the nails when the gun was fired. Amazon was very prompt in replacing the gun, and the return procedure was excellent. My second gun has performed perfectly. At 65 psi it consistantly sank 2 1/2" nails in siding perfectly. At 100 psi it easily sank 3 1/4" nails in framing. My limited experience with using the gun has been very positive. The gun is quite an improvement over my older Porter Cable 350 which jammed often with 2 1/2" nails. One should be prepared to purchase an air fitting for the nail gun since this is not mentioned in the description. It will take a 3/8" adaptor for a 1/4" air fiting. Ignoring the defect in the first gun, I can recommend the...
I believe, explains the few gripe on Makita AN923 3-1/2-inch Framing Nailer (22 Degree Round Head) not fitting or leaking.
Hope this Makita AN923 3-1/2-inch Framing Nailer (22 Degree Round Head) review was helpful!
No comments:
Post a Comment